How to Use Texol Thick Bleach | Dilution Ratios & Application Guide

What Is Texol Professional Thick Bleach?

Texol Professional Thick Bleach is an industrial-strength, high-viscosity heavy duty disinfectant formulated with high-purity sodium hypochlorite to deliver maximum germ-killing performance, deep stain removal, and total washroom sanitization. Engineered specifically for demanding commercial, institutional, and high-traffic facilities, its advanced thickened bleach formula clings effortlessly to vertical surfaces to extend chemical contact dwell time. This ensures it effectively eliminates 99.99% of harmful bacteria, fungi, viruses, and stubborn organic stains. Because it destroys foul odours at the molecular source rather than masking them, it serves as an essential primary sanitizer for commercial facilities looking to maintain immaculate hygiene standards while keeping cost-in-use exceptionally low.

 

🔍 How Texol Thick Bleach Works

Texol Thick Bleach sanitizes and cleans through a powerful process called oxidative disinfection and organic structural breakdown. Standard thin bleaches run straight down plumbing fixtures and into the drain before they can fully work, but the specialized thickening agents in Texol form a viscous blanket that clings to porcelain, tiles, and vertical pipes.

The active sodium hypochlorite penetrates deep into microscopic surface pores, breaking the chemical bonds of biological soils, dark mould, and stubborn mineral staining. It disrupts the cellular walls of broad-spectrum pathogens, rendering them completely inactive. This aggressive bleaching action lifts ingrained organic discoloration, kills deep-seated mildew, and liquefies organic silt matrices within drainage systems, leaving surfaces thoroughly brightened, sanitized, and deodorized.

 

🏢 Common Applications (Where to Use It)

Because Texol Thick Bleach is exceptionally powerful and highly viscous, it can be deployed safely across a wide array of commercial sectors:

·         Commercial Washrooms & Latrines: Deep-cleans and sanitizes toilet bowls, ceramic urinals, shower stall gullies, and multi-bay washroom tile floors.

·         Drainage & Waste Outlets: Purges organic slime, hair blockages, and foul backing odours inside commercial sinks, floor traps, and external drainage gullies.

·         Facilities Maintenance & Outbuildings: Destroys dark mould, slippery green algae, and ingrained mildew growth on concrete channels, external brickwork, and masonry pathways.

·         Institutional Laundries & Refuse Bays: Brightens industrial whites, sanitizes heavily contaminated cotton linens, and sanitizes large commercial waste bins and refuse areas.

 

🧪 Dilution Ratios & Mixing Matrix

Because Texol Thick Bleach is an industrial trade concentrate, it must be used neat or diluted with clean, cold water based on the specific sanitation task. Always use cold water, as hot water breaks down sodium hypochlorite rapidly, neutralizing its germ-killing performance.

To ensure exact chemical control, use a 30ml Precision Dosing Pump on your container. The table below details the exact ratios for all primary cleaning tasks based on standard 5L trade mop buckets:

Cleaning Task / Disinfection Setup

Dilution Ratio

Concentrate Volume per 5L Mix

Full Dosing Pumps (per 5L Bucket)*

1. Toilets, Urinals, Drains & Sinks

Use Neat

Direct Under Rim / Outlets

100ml to 200ml Neat

2. Heavy-Duty Stain, Mold & Mildew Stripping

1:10

500ml

16 Full Pumps

3. High-Volume Floor Mopping & Wall Wiping

1:50

100ml

3 Full Pumps (approx. 90ml)

4. Light Maintenance Sanitization & Cloth Soaking

1:100

50ml

1.5 Pumps (Use Measuring Cup)

⚠️ Note: For light maintenance soaking or micro-dosing under 50ml, always draw the raw chemical using a calibrated trade syringe or graduated measuring cup to maintain strict chemical compliance and eliminate splashing.

🚨 The Golden Mixing Rule

Always fill your application bucket or container with cold water first, then add the measured Texol Thick Bleach concentrate into the water. Never pour water directly into raw bleach concentrate. This simple workflow prevents dangerous chemical splashing and stops irritating bleach vapours from rising quickly toward the operator's face.

 

🛠️ Best Application Practices for Maximum Efficiency

·         Maximise Your Vertical Clinging Dwell Time: For deep toilet and urinal sanitization, apply Texol Thick Bleach neat directly under the flushing rim. Allow 10 to 15 minutes contact dwell time to give the viscous formula full opportunity to dissolve hard water discoloration and completely destroy bacteria. Scrub thoroughly with a stiff toilet brush before flushing clean.

·         Purging Commercial Odour Outlets: Pour 150ml of neat bleach down floor drains, commercial sinks, or external gullies at the end of a shift. Allow it to sit inside the trap overnight to dissolve organic slime accumulations and eradicate foul odour sources completely.

·         Avoid Metal and Fabric Discoloration: ⚠️ TAKE EXTREME CARE AROUND SENSITIVE SURFACES. Sodium hypochlorite is a powerful oxidizing agent. Avoid contact with carpets, fabrics, clothes, and soft metals like copper, brass, chrome, or polished aluminium, as it will bleach colours instantly and pit metallic coatings.

·         Use the Right Size Setup: For fast daily washroom rounds, fill handheld applicator bottles from your central stock. Screw a dedicated 30ml Precision Dosing Pump straight onto your 5L or 25L trade containers to measure ratios perfectly with zero waste or messy splashes.

 

📋 COSHH Safety Rules & Required PPE (Staying Safe)

Texol Thick Bleach is a high-potency, corrosive alkaline disinfectant. You must protect yourself and your staff fully during handling, mixing, and application:

·         Eye Protection: Always wear heavy-duty chemical splash goggles or a clear face shield when pouring, handling, or diluting the raw chemical. Bleach splashes cause immediate, severe eye irritation and serious permanent eye damage on direct contact.

·         Skin Protection: Wear protective, long-sleeve Nitrile or PVC gloves, protective aprons, and full-length trousers. Direct skin contact with concentrated bleach will strip skin moisture, causing immediate chemical irritation or skin damage.

·         Ensure Maximum Ventilation: Always work in well-ventilated washrooms or open-air environments. Bleach releases sharp, concentrated vapours that can irritate the respiratory system if used heavily in enclosed spaces.

🚨 THE CRITICAL CHEMICAL PROHIBITION

NEVER MIX BLEACH WITH ACIDIC CLEANERS, TOILET DESCALERS, OR BLUE BLOCK FIXTURES. Mixing sodium hypochlorite bleach with acidic descalers (such as Jebsol 52 or Glaze) triggers an immediate chemical reaction that releases highly toxic, lethal chlorine gas. Keep these chemical lines strictly separated at all times.

 

🚑 First Aid Measures

·         Skin Contact: Take off immediately all contaminated clothing. Wash the affected skin areas thoroughly under fresh running water or an emergency shower for at least 15 minutes. Seek medical attention immediately.

·         Eye Contact: Rinse cautiously with fresh cold water or an eye-wash station for at least 15 minutes, keeping the eyelids held wide open. Remove contact lenses if present and easy to do—continue rinsing. Seek urgent, immediate medical attention.

·         Ingestion: Wash out the mouth thoroughly with fresh water. DO NOT induce vomiting under any circumstances. Drink plenty of fresh water or milk to dilute the solution and seek urgent, immediate medical advice.

 

📦 Storage & Handling Safety

·         Secure Chemical Storage: Store only inside the original, tightly capped container positioned completely upright. Keep in a cool, dry, well-ventilated chemical bay away from direct sunlight, extreme heat, flammable materials, and strong acids. Direct sunlight and high heat rapidly degrade sodium hypochlorite, weakening its shelf life.

·         Keep Secure: Ensure the safety caps are fully locked down after every single shift. Keep stored securely out of reach of children and unauthorized personnel.

·         Responsible Waste Disposal: Small amounts of diluted, spent mopping solution can be rinsed away safely into dedicated foul water systems. Dispose of empty plastic containers in full accordance with local UK environmental regulations. Do not discharge raw concentrate directly into public stormwater channels.

 

🛒 Ready to Secure Your Heavy-Duty Facility Supplies?

We stock premium Texol Professional Thick Bleach in high-economy bulk 5L and 25L trade refills with optional precision dispensing setups for contract cleaning crews, facility managers, and commercial operators:

 

Disclaimer: This guide is for informational purposes only. Always read the official product Safety Data Sheet (SDS) and comply with all standard UK COSHH regulations before executing chemical procedures.

 

💬 Frequently Asked Questions (FAQ)

Q: Can I dilute Texol Thick Bleach with hot or warm water to clean faster? A: No. You must always mix bleach with cold water. Hot water triggers rapid chemical decomposition of sodium hypochlorite, breaking down the active germ-killing properties before it touches the surface while causing strong chemical fumes to rise into your breathing area. For direct ordering and full variant options, visit our official Texol Professional Thick Bleach Product Page.

Q: Can Texol Thick Bleach be mixed with acidic toilet cleaners or descalers? A: No. NEVER mix bleach with acidic cleaners or descalers. Combining sodium hypochlorite with acid creates an immediate chemical reaction that releases hazardous, highly toxic chlorine gas. Keep your bleach products completely separate from acidic scale removers at all times.

Q: How do I request an official COSHH Safety Data Sheet (SDS) for my business? A: To ensure compliance with UK COSHH regulations and protect facility management standards, official SDS documents are available directly upon request. Simply visit our Corporate Contact Page and submit your enquiry—our technical team will email the official compliance files straight to your desk.

 

Back to blog

Leave a comment